Fisher & Paykel AquaSmart Guide D'utilisation page 39

Adjusting your options
Enter the Option Adjustment mode (refer to page 36).
1
The diagram below shows how the wash cycle icons relate to the pre-set options you can
2
change. It also shows what will be displayed when you first enter Option Adjustment mode.
Options you can change are accessible using the HEAVY, DELICATE, SHEETS and EASY IRON cycles
only.
Use this diagram to help you adjust the options, eg select the HEAVY cycle to modify the cold
wash temperature, select the DELICATE cycle to change the out of balance (OOB) recovery
process, and so on.
Fig.22 Option Adjustment mode
Use the MORE
3
through the available settings of your selected option, or if your model does not have these
buttons, use the HIGH EFFICIENCY button.
Recovery
OC Beeps
actory Reset
Fig.23 Changing the pre-set options
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset
and LESS DELAY START buttons underneath the digital display to scroll
Changing pre-set options
Fig.24 Changing the pre-set options – if your
washer does not have the DELAY START buttons
use the HIGH EFFICIENCY button
US
37
CA