Listening To Music Via Airplay; Playing A Song From Itunes/Iphone - Yamaha NP-S303 Mode D'emploi

Listening to music via AirPlay

You can use the AirPlay function to play iTunes or iPhone music files via a network.
iTunes
PC
Wireless
router
iPhone
NOTE
• To use this function, the unit and your PC, iPhone must be connected to the same router (page 21).
You can verify whether the network parameters (such as the IP address) are properly assigned to
the unit under "Network" (page 43) in the Setup menu.
• If the iPhone does not recognize the unit, check your network environment (such as the router)
(page 21).
• For information on supported iPhones, please refer to "Supported devices and file formats"
(page 53).

Playing a song from iTunes/iPhone

Follow the procedure below to play the music from iTunes or iPhone on the unit.
1
Start iTunes, or display the Music playback screen on the iPhone.
Once the iTunes or iPhone recognizes the unit, the AirPlay icon appears.
iOS 10 (display example)
This unit
• If the icon does not appear, make sure that the unit and the PC or iPhone are connected to
2
On the iTunes or iPhone, click (tap) the AirPlay icon, and then select
"NP-S303 XXXXXX" (network name of the unit) as the audio output
device.
• You can change the network name of the unit by using the "Network Name" parameter under
3
Select a song in iTunes or on the iPhone to start playback.
The unit automatically selects "AirPlay" as the source, and playback starts.
The playback information is shown on the display.
• Press DISPLAY repeatedly to switch the type of displayed information (page 39).
• If "Standby (Network Standby)" (page 44)in the Setup menu is set to "On" or "Auto", the unit
• An underscore (_) will be displayed for characters not supported by the unit.
iTunes (display example)
NOTE
the router properly.
NOTE
"Network" in the Setup menu (page 44).
NOTE
will automatically turn on when playback starts on iTunes or iPhone.
35
En