Preparation; Connecting To An Amplifier - Yamaha NP-S303 Mode D'emploi

PREPARATION

1

Connecting to an amplifier

CAUTION
• Do not plug the power cords of this unit and all other connected devices into AC outlets until all connections are complete.
ANALOG OUT
R
RCA stereo cable
(supplied)
Only PCM signals can be output from the DIGITAL OUT (OPTICAL/COAXIAL) jacks of this unit.
NOTE
• On some audio devices (such as an amplifier) that are digitally connected, audio output might be interrupted at the beginning of a track.
• DSD signals and signals over 192kHz will not be output from the DIGITAL OUT jacks of this unit.
• Digital signals output from this unit cannot be recorded.
18
En
DIGITAL OUT NETWORK
COAXIAL OPTICAL
Coaxial digital audio cable
(commercially available)
Amplifier
Optical digital cable
(commercially available)
Amplifier
AC IN
* Illustration above shows Europe model.