Yamaha Motor YDRE Manuel D'exploitation page 34

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

JC1
MAINTENANCE
NOTICE
Always put the tow switch in the
"TOW" position before charging
battery or damage to the electrical
system may result.
2. Lift up the seat and move the
tow switch to the TOW position.
NOTICE
Use only battery chargers that are
rated for use with 48-volt Yamaha
PTVs. Serious battery damage can
result. Thoroughly read and
understand the user manual
supplied with your 48-volt
charger.
3. With the charger properly
connected and grounded (see
charger's owner's manual),
insert the DC output into the DC
charger receptacle.
Y-669c
Do not disconnect the DC output
cord from the DC charger
receptacle when the charger is on
or an arc could occur that may
cause an explosion.
4. The charger will turn off
automatically when the batteries
reach full charge.
5. After the charger has turned off,
disconnect the DC output plug
from the DC charger receptacle
by grasping the plug body and
pulling the plug straight out of
the receptacle.
1
2
3
4
5
6
7
8
9
10
11
7-6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ydrex5 ptv jc1-600101

Table des Matières