Yamaha Motor YDRE Manuel D'exploitation page 17

SAFETY CONSIDERATIONS
SAFETY PRECAUTIONS
1
DURING MAINTENANCE
When performing maintenance,
2
follow all safety instructions contained
in the manufacturer's operation and
service manuals, as well as the
following safety procedures:
3
Properly immobilize PTV before
G
beginning any maintenance to
avoid any unexpected vehicle
4
movement.
Properly block chassis before
G
working underneath PTV to avoid
any unexpected vehicle movement.
5
When working on the battery, do
G
not smoke, or allow any sparks or
open flames near the vehicle, to
6
avoid any fires or explosions.
Before working on an electric
G
PTV, disable the car's electrical
7
system in accordance with the
manufacturer's instructions to
avoid electrical shock or damage
to the electrical system.
8
Use only properly insulated tools
G
when working on electrically
powered PTVs or around batteries
9
to avoid electrical shock or
damage to the electrical system.
Maintain all safety devices includ-
G
ing brakes, steering mechanisms,
10
warning devices and governors, in
a safe operating condition. Do not
modify these safety devices as
11
supplied by the manufacturer.
After each maintenance or repair,
G
the car must be driven by a
qualified, trained and authorized
person – in an area free of
pedestrian traffic – to ensure
proper operation and adjustment.
3-3
Record all maintenance performed
G
in a maintenance record log by
date, name of person performing
maintenance and type of mainte-
nance. Periodically inspect mainte-
nance log to ensure accurate and
complete entries.
Provide operator comment cards
G
to assist in identifying non-periodic
maintenance needs for specific
PTVs.
Maintain in a legible condition all
G
nameplates, warnings and
instructions provided by the
manufacturer.
If new nameplates, warnings or
G
instructions are needed, contact
your Yamaha dealer.
STORAGE AND
BATTERY CHARGING
Take the following precautions to
ensure maintenance worker safety:
Only use battery changing and
G
charging facilities and procedures
that are in accordance with applic-
able ordinances and regulations to
avoid explosions, electrical shock
or damage to the electrical
system.
Periodically inspect charging facili-
G
ties and procedures to be certain
that applicable safety codes,
regulations and procedures are
being followed to avoid any fires
or explosions.
JC1