Fisher & Paykel AeroCare Instructions D'installation Et Guide D'utilisation page 54

Getting started quickly
CA
52
(EN)
AeroCare DE7027G, DG7027G
Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been
replaced correctly in its housing before using your dryer.
Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door,
then close the door. Check the door is fully closed before starting the dryer.
Important!
Ensure there is plenty of room for the garments to tumble freely while drying – do not overload
your dryer. Load in terms of the space clothes take up when dry rather than when they are wet.
Press POWER to activate your dryer.
1
Your dryer will default to the REGULAR cycle. Select your desired drying cycle.
2
Select your preferred drying options (if you wish to select different options from the default options
3
programmed for the cycle) using the SmartTouch™ buttons on the right hand side of the panel.
Touch the START/PAUSE button to start the drying cycle.
4
Fig.46 AeroCare control panel (DE7027G, DG7027G)
Note: the control panel may differ depending on what model of dryer you have.
1
2