Fisher & Paykel AeroCare Instructions D'installation Et Guide D'utilisation page 33

For transition venting (dryer to wall):
DO:
DO cut duct as short as possible
and install straight into wall
Fig.20 Correct venting installation
DO NOT:
DO NOT bend or collapse ducting
Use elbows if turns are necessary
DO NOT crush duct against the wall
Fig.21 Dangerous venting installation set ups
Installation instructions
Elbows
DO use elbows when turns
are necessary
DO NOT use excessive exhaust length
Cut duct as short as possible
DO NOT set dryer on duct
31 CA
(EN)