Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.
All Installations
Tools needed:
*Must be the proper size to connect your household wiring to 16-
gauge wiring in dishwasher.
Other useful items you may need:
Parts supplied:
Parts needed:
4 #10 x ¹/₂" wood screws (if installing custom front panels)
INSTALLATION REQUIREMENTS
Supplied in Kit:
4 Plastic studs (attached to each other by runners)
4 Short screws (10-16 hex head screw)
4 Long screws (8-18 Torx
®
head screws)
1 Template (located inside Use and Care Guide bag assembly)
1 Instruction sheet (located inside Use and Care Guide bag
assembly)
NOTE: The screws supplied are used for only ³⁄₄" thick wooden
panel. If the wooden panel is less than ³⁄₄" thick, customer must
purchase screws locally.
Other parts you may also need:
NOTES:
Moisture barrier tape is recommended when installing a
dishwasher under a wood countertop.
Parts available for purchase in plumbing supply stores. Check
local codes. Check existing electrical supply. See "Electrical
Requirements" section. It is recommended that electrical
connections be made by a licensed electrical installer.
In addition, for first-time installations
Tools needed:
Parts needed:
Additional parts supplied with top-venting models only:
Additional parts supplied with certain models only
Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230.
†
®
TORX and T20 are registered trademarks of Saturn Fasteners, Inc.
3
Publicité
Chapitres
Table des Matières
