Calibrating The Pump To A New Sensor Cable; Display Of Current Software Version Number - IBS VacuSafe Mode D'emploi

Rotate the voltage selector until the required
●
voltage is facing forward (115 or 230 V)
Replace the voltage selector
●
Replace both fuses with correctly designated ones
●
for the voltage in question
Replace the fuse chamber
●
Check that the correct voltage is visible in the win-
●
dow of the fuse chamber.
10.4 Calibrating the pump to a
new sensor cable
VacuSafe has been calibrated to the sensor cable provided.
If a new cable has to be used, the VacuSafe will have to be
recalibrated (see chapter 8) .
10.5 Display of current software
version number
The current software version number is indicated during
activation and calibration of the level monitor.
See section 8.2.
31