Setting The Power Voltage - IBS VacuSafe Mode D'emploi

10.3 Setting the voltage
30
VacuSafe has been set, ex-factory to the voltage for the
country of sale.
If necessary, the voltage may be reset.
The voltage switch can be accessed when the fuse chamber
at the rear of the instrument is open.
1
Danger: Disconnect VacuSafe from the power
supply before carrying out this operation!
2
Danger: Use correctly labelled fuses for the voltage
in question.
NB:
Fuse type see technical data.
Procedure:
Disconnect the power cable
●
3
Remove the fuse chamber (3) with a suitable tool,
●
e.g. screwdriver
Withdraw the voltage selector housing (1)
●