Safety Precautions - Masterflex E/S 07571-00 Notice D'utilisation

DANGERS: NEVER apply AC voltages directly to the EXTERNAL POWER INPUT receptacle on the front panel.
The application of AC voltages can result in injury and death of the operator and destruction of the
unit. Use only the AC/DC Power Supply/Converter supplied with the unit to power unit from an AC
source.
NEVER short or connect the terminals of the battery terminals together. Shorting of the battery ter-
minals causes rapid internal heating of the battery resulting in the explosion of the battery and se-
vere injury to or the death of the operator.
The AC/DC Power Supply/Converter is rated for INDOOR USE ONLY. DO NOT use the AC/DC
Power Supply/Converter in an outdoor environment to either charge the battery or power the
drive. Electrical shock, severe injury and/or death is possible if this warning is ignored.
DO NOT BURN OR INCINERATE THE BATTERY. THE BATTERY MAY EXPLODE CAUSING
SEVERE INJURY OR DEATH OF THE PERSONNEL IN THE AREA. (Dispose of the old battery by re-
cycling.)
CAUTIONS: Do not reverse the connections to the battery. If the battery connections are reversed, damage to
the unit will occur.
Fully charge the unit before using for the first time. Damage to the internal battery can result if the
battery is in a fully discharged state and operation of the unit is attempted.
Immersion or submersion of the unit will result in improper operation and possible damage to the
unit.
Use of pump heads, tubing sizes and formulations other than those specified in this manual, or the
mounting and use of two or more pump heads concurrently will result in improper operation and
possible damage to the unit.
WARNINGS: Tubing breakage may result in fluid being sprayed from the pump. Use appropriate measures to
protect the operator and equipment.
Turn drive off, remove all the power to the unit, including the AC/DC Power Supply/Converter,
Automotive Power Adapter or other external power source if present before removing or installing
pump head or tubing. Place the Mode of Operation Switch (RUN/CHARGE) in the "CHARGE" posi-
tion and all other switches in the off position. This will help prevent accidental activation of the
drive mechanism so fingers or loose clothing will not get caught in the pump drive mechanism.
This product is not designed for, nor intended for use in, patient-connected applications, including, but not limited to,
medical and dental use and, accordingly, has not been submitted for FDA approval.

SAFETY PRECAUTIONS

WARNING: PRODUCT USE LIMITATION
3