Airplay - Onkyo TX-NR474 Mode D'emploi

Masquer les pouces Voir aussi pour TX-NR474:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 85
> Before Start
> Part Names
®

AirPlay

1
2 2
Wi-Fi
Basic operations
You can wirelessly enjoy the music files on
®
®
®
an iPhone
, iPod touch
, or iPad
connected to the same access point as this
unit.
0 Update the OS version on your iOS
device to the latest version.
0 There may be some differences in the
operations screens and how operations
are performed on the iOS device
depending on the iOS version. For
details, see the operating instructions for
the iOS device.
1. Connect the iOS device to the access
point.
2. Press NET.
3. Tap the AirPlay icon
in the play
screen of the music app on the iOS
device and select this unit from the list of
devices displayed.
4. Play the music files on the iOS device.
0 The default status is for the Network
Standby feature to be on, so when you
do steps 3 and 4 above, this unit
> Install
> Initial Setup
3
automatically comes on and input
switches to "NET". To reduce the
amount of power consumed in standby
mode, press the
button on the remote
controller, then in the Setup menu
displayed set "5. Hardware" -"Power
Management" -"Network Standby" to
"Off".
0 Due to the characteristics of AirPlay
wireless technology, the sound produced
on this unit may slightly be behind the
sound played on the AirPlay-enabled
device.
You can also play the music files on a
computer with iTunes (Ver. 10.2 or later).
Before operation, make sure this unit and
the PC are connected to the same network,
then press NET on this unit. Next, click the
AirPlay icon
in iTunes, select this unit
from the list of devices displayed, and start
play of a music file.
> Playback
2 4
iPhone
Onkyo TX-NR474 XXXXXX
Advanced Setup | Supplementary Information | Others
e.g., iOS 10
27
En

Publicité

Table des Matières

Dépannage

loading

Table des Matières