Problems; The Pellets Do Not Ignite; Power Failure (Black-Out) - ZANTIA KERA Manuel D'utilisation Et D'entretien

Troubleshooting
7

PROBLEMS

7.1

THE PELLETS DO NOT IGNITE

In the event of failed ignition, the alarm message "AL5 FAILED
IGNITION" is displayed.

Press the key (4) to restore standard conditions.
fig. 47 control panel - failed pellet ignition
7.2

POWER FAILURE (BLACK-OUT)

In the event of a power failure, upon restoration, the stove en-
ters in "FINAL CLEANING" mode and waits for the flue gas tem-
perature to drop to a value preset by the manufacturer.
fig. 48 control panel -power failure

After a power failure, the stove will try to go back
to the prior condition. Only if power remains cut
for longer than the time set by the manufacturer,
the product will switch off automatically when power is
restored.
Mod. KERA rev 01 translated from the original text
EN
51