Thermador Professional VCIB Serie Manuel D'installation page 16

d) Reinstall core partition after running the harness
through the access hole.
e) Insert remote harness end into the mounting hole,
as indicated in Figure 19, until it clicks.
Remote Remote Remote
Harness Harness Harness
Figure 19: Remote Harness Mounting Hole
15 15 15
/ / ʺ ʺ
16 16 16
3 3
ʺ ʺ
/ /
8 8
4. Connect the remote control to extension harness with
the included 30 ft (914.4 cm) cable.
5. Insert remote control into cutout. Secure from behind
with two (2) nuts onto the weld studs (Figure 22).
6. Reinstall hood components from Figure 15 and
Figure 16.
English 14
Harness Harness Harness
Mounting Mounting Mounting
Hole Hole Hole
11
/ ʺ (17 mm)
16
3 3
/ / ʺ ʺ
16 16 16
3 3 ʺ ʺ
/ /
8 8
f) Connect the extension harness to the connector
inside the junction box.
3. Prepare wall (or similar surface) cutout for installation
as shown below in Figure 21.
11
ʺ (17 mm)
/
16
3 ʺ
/
8
Figure 21: Wall Cutout (view is shown facing wall)
Figure 20: Pigtail Remote Connection
ʺ ʺ
5 5
/ /
8 8
9
/
16
3 3
/ / ʺ ʺ
8 8
Figure 22: Remote Install
ʺ