Thermador VCIN Serie Instructions D'installation

Before you begin read these instructions carefully. This
Liner is an optional accessory which, when used in
conjunction with a Custom Insert, will increase the overall
capture area and protect surrounding building materials.
The liner must be installed before the custom insert. Refer
to the Custom Insert Installation Manual for complete
installation information.
Before installing, remove the protective plastic film from
all parts.
Liner Model
LINER236
LINER248
LINER254
Hood liner installation
1. Slide the liner onto the hood (Figure 2).
2. Hold liner flush to the bottom of the housing.
3. Secure the liner to the hood with eighteen (18) x ½"
(12.7 mm) screws, as indicated in Figure 3 and
Figure 4.
CAUTION:
Insert Model
VCIN36JP
VCIN48JP
VCIN54JP
Figure 1: VCIN Liner
VCIN Series Custom Insert
Liner Installation Instructions
Figure 2: VCIN Liner Installation
½" (12.7 mm)
X3 each side
Figure 3: VCIN Secure Liner Sides
½" (12.7 mm)
X6 each front
& back side
Figure 4: VCIN Secure Liner Front & Back
English 1