Audio Dubbing; Doublage Sonore - Sony Digital Handycam DCR-TRV60E Mode D'emploi

Table des Matières

Publicité

Audio dubbing

You can record additional audio to the original
sound on the tape by connecting audio
equipment or a microphone. If you connect the
audio equipment, you can add sound to your
tape already recorded in the 12-bit mode by
specifying start and end points. The original
sound will not be erased.
You cannot dub audio in the following cases:
•The tape recorded in the 16-bit mode
•The tape recorded in the LP mode
•Connecting with the
•The blank portions of the tape
•When the write-protect tab of the cassette is set
to lock.
Preparing for audio dubbing
You can record additional audio in the following:
•Dubbing with the built-in microphone
•Connecting the microphone (optional) to the
MIC jack
•Connecting the microphone (optional) to the
intelligent accessory shoe
•Connecting the A/V connecting cable to the
AUDIO/VIDEO jack
The audio input to be recorded takes precedence
over others in the following order:
•MIC jack
•Intelligent accessory shoe
•AUDIO/VIDEO jack
•Built-in microphone
Dubbing with the built-in
microphone
No connection is necessary.
DV Interface

Doublage sonore

Vous pouvez enregistrer une bande son que vous
ajouterez à la bande originale en vous raccordant
à un appareil audio ou un microphone. Si vous
utilisez un appareil audio, vous pouvez ajouter
une bande son sur une cassette déjà enregistrée
en mode 12 bits en spécifiant les points de départ
et de fin du passage. La bande son originale ne
sera pas effacée.
Vous ne pouvez pas copier une nouvelle
bande son dans les cas suivants :
•La cassette est enregistrée en mode 16-bits
•La cassette est enregistrée en mode LP
•Raccordement avec l'interface DV
•La cassette contient des passages vierges
•Le taquet de protection de la cassette est tiré
Préparation de la copie d'une
bande son
Vous ne pouvez pas enregistrer une nouvelle
bande son dans les cas suivants :
•Doublage sonore avec le microphone intégré
•Raccordement d'un microphone (en option) à
la prise MIC
•Raccordement d'un microphone (en option) à
la griffe porte-accessoires intelligente
•Raccordement d'un cordon de liaison audio/
vidéo à la prise AUDIO/VIDEO
L'entrée audio sélectionnée en priorité pour
l'enregistrement sera, dans l'ordre :
•Prise MIC
•Griffe porte-accessoires intelligente
•Prise AUDIO/VIDEO
•Microphone intégré
Doublage sonore avec le microphone
intégré
Aucun raccordement n'est nécessaire.
119

Publicité

Table des Matières
loading

Table des Matières