Flange Installation - Mettler Toledo InPro 7200 Serie Instructions D'utilisation

InPro 7200 Series
4.2

Flange Installation

METTLER TOLEDO flanges are used for permanent installations
in pipelines and tanks. Flanges are used with electrodeless con-
ductivity sensors in systems using 2-inch and larger process
piping. Flanges come complete with locknut and a set of spa-
cers. Refer to Table 4 for flange specifications, and to Figure 3
for a typical flange installation.
Note: One or two spacers are used depending on flange thickn-
ess. The O-ring must be positioned correctly for proper spacing.
Flange size
ANSI 2"
ANSI 2 1/2"
ANSI 3"
ANSI 4"
DN 50 / PN 16
DN 100 / PN 16
Table 4: Flange Specifications. *Flanges made of stainless steel are
supplied as standard with Inspection Certificate 3.1B.
Typical Flange Installation
Flange and accessories
© 08/04 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
Flange I.D.
Locknut
Figure 3: Flange installation
Part No (Set)
52401933
52401934
52401938
52401939
52401940
52401941
Material*
1.4435
1.4435
1.4435
1.4435
1.4435
1.4435
O-ring must seat
on flange I.D.
Spacers (see Notes)
InPro 7200 Series
52 001 408
13