Pioneer MCS-838 Mode D'emploi page 30

30 Connecting
En
3. Secure the speaker and the pole with 2
screws. Ensure that the speaker wire does
not get pinched between the speaker and
the pole. The height of the speaker stands
can be adjusted in two levels; select the
height you prefer, and fix in position.
2
For direct installation
Use the supplied adhesive to attach 4 pads to
the base of the front speakers.
Connect the wires to the player
Insert the cables connected to the player to the
same colored connector on the speaker.
Caution
Do not connect any speakers other than those
supplied to this system.
Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.