Texas Power Split 2000 VH Guide D'utilisation page 26

Step 6: Attach Hydraulic
Cylinder Log Cradle
Assemble the hydraulic cylinder to
the tow bar, secure with cotter pin
Ø4x40 (#12) & Hinge Pin (#37).
Step 7: Attach engine
Use the hex bolt M8x85 (#48)
through the big flat washer Ø10
(#102), polyurethane block (#103),
nitrile rubber (#19), the flat washer
Ø8 (#45), lock washer Ø8 (#46)
and lock nut M8 (#57) mount the
engine (#53) to the mounting plate.
Step 8: Assemble Ball Coupler &
Chain
1.Attach the coupler (#28) to the
tow bar by using hex bolt M10x120
(#43), flat washer Ø10 (#97) and
lock nut M10 (#32).
2.Attach two chains (#41) to the
tow bar by using hex bolt M12x90
(#40), flat washer Ø12 (#3), lock
nut M12 (#67) and thick flat washer
Ø12 (#68).