Texas Power Split 2000 VH Guide D'utilisation page 25

Step 2: Attach Tow bar and
Support Leg
Fix the support leg (#62) to the tow
bar by a pin (#42) and handle
wheel (#83).
Step 3: Attach Tow bar to Oil
Tank
Fix the tow bar to the oil tank by
using 4 sets of hex bolt M12x40
(#31), flat washer Ø12 (#3) and
lock nut M12 (#67).
Step 4: Assemble Rear Support
Leg
Fix the rear support leg to the tow
bar by using hex bolt M10x75
(#36), lock nut M10 (#32), flat
washer Ø10 (#105), R pin(26) and
handle ring(104) and (105). Slide in
hitch pin (#35) and secure with R
pinØ3x55 (#26).