Tuner; Listening To The Radio; Changing The Display Information - JVC KW-V41BT Mode D'emploi

TUNER

TUNER

Listening to the radio

Indications and buttons on the source
control screen
4 7
1 2 3 5 6 8 9 p
q
w
Tuner reception information
1 STEREO/MONO indicator
• The STEREO indicator lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
2 NEWS indicator
3 AF indicator
4 TI indicator
5 Seek mode
6 LO indicator (Page 20)
7 Preset no.
8 RDS indicator: Lights up when receiving a Radio
Data System station.
9 EON indicator: Lights up when a Radio Data
System station is sending EON signals.
p The station frequency currently tuned in
q Band
w Text information
• Pressing [H] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[Mode] Changes the settings for tuner
reception on the <Tuner Mode>
screen. (Pages 20 and 22)
Presets stations automatically.
[SSM ]*
(Page 20)
[TI]* Activates/deactivates TI standby
reception mode. (Page 21)
[MONO]* Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
[Text] Changes the display information.
(See the right column.)
[PTY]* Enters PTY search mode. (Page 21)
[AM]
Selects the AM band.
[FM]
Selects the FM band.
[Seek] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANUAL: Manual Search
[S] [T] Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
* Appears only when FM is selected as the source.

Changing the display information

The preset list containing the station names for FM
Radio Data System (when a PS signal is coming in) is
displayed.
• Press [Text] again to display the text information
for the station currently being received.
ENGLISH 19