Discs; Playing A Disc; Inserting A Disc; Playback Operations - JVC KW-V41BT Mode D'emploi

DISCS

DISCS

Playing a disc

• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 52.

Inserting a disc

Insert a disc with the label side facing up.
KW-V41BT
KW-V215DBT/
KW-V21BT/KW-V11
The source changes to "DISC" and playback starts.
• The DISC IN indicator lights up while a disc is
inserted.
• If " " appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing "
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
10
Ejecting a disc
KW-V41BT
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
Closing the monitor panel (only for KW-V41BT)
After removing the disc, press M on the monitor
panel. The monitor panel closes.

Playback operations

When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 37.
,"
KW-V215DBT/KW-V21BT/
KW-V11
Indications and buttons on the source
control screen
For video playback
1 2 3 4 5
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Playback mode (Page 13)
3 File type
4 DISC IN indicator
5 Current playback item information (title no./
chapter no./folder no./file no./track no.)
6 Playing time
6