Table des Matières
Publicité
1
2
3
4
5
• Inserting bobbin
z Place a bobbin in the bobbin case, making
x Draw the thread through the slot of the case.
c Continue to draw the thread under the tension
1
v Holding the latch open, position the bobbin
b The case should lock into the place when the
18
sure the thread feeds clockwise from the
bobbin.
spring and through the opening.
Pull out about 4˝ (10 cm) of thread.
q Tension spring
case into the shuttle, and then release the
latch.
latch is released.
Publicité
Table des Matières
