Control Panel - ratiotec rapidcount T 575 Mode D'emploi

Control panel

CLEAR: _____________ Deletes the number of counted banknotes or turns off the batch function.
BATCH: _____________ Activate and deactivate the bundle function Exact counting of banknotes (e.g. bank
wrapper). The bundle size can be adjusted between 1 and 200 using the keys next
to the display. In a batch count, the machine only counts a specified number of no-
tes. To set the individual number of notes, you have to press the BATCH button. The
default number "B:100" is now shown in the display. If you press the BATCH button
again, you can select between the default quantities 100, 50, 20, 10 and 5. You can
adjust these quantities individually, press or hold the +1/+10 button to increase
the number. After setting the appropriate batch, place a stack of banknotes in the
feeder. The machine starts the counting process. When the batch set is reached,
the machine stops automatically.
CUR: _______________ Currency selection
To change the currency, press the CUR button to select between the available
currencies. The selected currency is shown at the top left of the display.
Multi-Mix
"MULT" and "Mix" are shown on the display. In this mode, the device counts
mixed currencies. EUR, USD and GBP are set as default.
After the counting process, the number of notes and the total value of each curren-
cy are shown on the display.
Auto
The auto mode is characterised by 4 stars. In this mode, the currency fed in is
automatically recognised if the device supports it.
PRINT: _____________ A print-out is possible using the optionally available RTP 300 thermal receipt
printer. If a receipt printer is connected to the printer connection of the banknote
counter, a receipt can be printed by holding the PRINT key.
[ EN]
11