Specific Safety Instructions - Virax VIPER P22+ Notice D'utilisation

OF CHILDREN. DO NOT ALLOW
PERSONS NOT KNOWING THE TOOL
OR THESE INSTRUCTIONS TO USE
THEM.
• APPLY THE TOOL‟S MAINTENANCE
INSTRUCTIONS. CHECK THERE IS NO
MISALIGNMENT, BLOCKING OF
MOVING PARTS OF BROKEN PARTS
BEFORE USE.
• USE THE TOOL AND ACCESSORIES
AS PER THESE INSTRUCTIONS,
WHILE CONSIDERING THE WORK
CONDITIONS AND WORK TO BE
PERFORMED.
• CONSIDER THE WORKING
ENVIRONMENT.
• USE ONLY ACCESSORIES
RECOMMENDED BY VIRAX FOR YOUR
MODEL.
3.5 Maintenance and servicing of the tool
• MAINTAIN YOUR TOOL CAREFULLY.
• THE HANDLE MUST BE CLEAN AND
WITHOUT OIL.
• HAVE YOUR TOOL MAINTAINED BY
AN APPROVED REPAIR SHOP USING
ORIGINAL SPARE PARTS.

4 Specific safety instructions

Always wear hearing protections when working with the tool. Noise emitted may cause hearing troubles.
During work, wear protection glasses to avoid projections.
WARNING: Always keep your fingers and hands away from the jaw during the crimping cycle. Non compliance
with this instruction may cause severe injuries.
4.1 Precautions of use of the crimping machine
• NEVER ATTEMPT TO ADJUST OF
CHANGE THE ACCESSORIES
WITHOUT DISCONNECTING THE
BATTERY.
• DO NOT USE THE TOOL WHEN ITS
BATTERY IS DAMAGED.
• DO NOT INSERT YOUR FINGERS IN
THE JAW PROFILE.
• NEVER ATTEMPT TO REPAIR A
DAMAGED JAW.
• DURING WORK, HOLD THE TOOL
WITH BOTH HANDS AND MAINTAIN
YOUR BODY IN A STABLE POSITION.
WARNING:
• Always stop the tool and disconnect the battery before any adjustment or maintenance operation.
Many accidents are due to poorly maintained tools. Any protection,
switch or other part damaged or faulty must be repaired or changed
by a skilled technician.
Using the tool for operations different from those planned may lead
to hazardous situations. Always comply with the machine‟s
capacity, while considering the work conditions and tasks to be
performed. Using the machine for users other than those planned is
hazardous and cancels all guarantees.
Do not expose power tools to rain nor store them in a damp or wet
location.
Non observance of this instruction may present a danger for the
user and cancels the guarantee.
Keep your tools clean to ensure proper operation.
Clean and grease the rollers regularly.
Maintain the tools clean to ensure safe handling.
Non observance of this instruction may present a danger for the
user and cancels the guarantee.
Omitting to disconnect the crimping machine battery before
adjusting or changing the accessories may cause severe injuries.
A damaged battery increases the risk of electric shock.
Inserting your fingers in the jaw profile may cause severe bodily
injures.
A modified jaw can break under pressure during the crimping cycle.
Throw and replace the complete jaw.
The tool is better guided when held with both hands.
When working in high places, check nobody is below you.
20