Publicité
A dock leveller for loading docks is designed to be used as bridge between the dock and the loading
vehicle. Do not use for elevation and circulation.
✓ For a safe and guaranteed installation, you must follow the assembly instructions specified in this
document.
✓ Do not work under the dock leveller without placing the safety bar or using another
mechanical method to prevent its hypothetical fall in case of hydraulic lock failure.
✓ Revise the made welds and check if are fused with the two ends to be joined. Weld in the indicated
minimum length.
✓ Do not leave any of the indicated spots in this manual without fixation.
The non-appliance of these instructions may cause accidents or serious damage.
5
Publicité
