System Connections; Aerial Connection - Sharp XL-BB20D Mode D'emploi

System connections

Make sure to unplug the AC power lead before making any connections.
Wall socket
(AC 100 - 240 V
~ 50/60 Hz)
■ Line In connection
Connect to the TV using an audio cable.
TV
(commercially
Main unit
To select Line In function:
● On main unit: Press INPUT button repeatedly until Line
In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 6
Installing the supplied
FM/DAB aerial
FM/DAB aerial
To audio output
sockets
Audio cable
available)
To LINE input
sockets
B503

■ Aerial connection

Supplied FM/DAB aerial:
Connect to the FM/DAB 75 ohms socket and position it
where reception is best.
External FM/DAB aerial:
Use an external FM/DAB aerial (75 ohms coaxial cable)
for better reception. Disconnect the supplied FM/DAB
aerial wire before use.
Note:
Keep the aerial away from the unit or AC power lead to
avoid noise pickup.
■ Bluetooth standby mode
● The first time the unit is plugged in, it will enter the
Bluetooth standby mode. Bluetooth standby indicator
lights up.
● To cancel the Bluetooth standby mode, press the ECO
button (remote control) during power standby mode.
The unit will enter the low power consumption mode.
● To return to the Bluetooth standby mode, press the ECO
button again.
■ AC power connection
After all connections have been made correctly, plug the
AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
EN-6
To AC INPUT
socket
2018-01-25 10:09:50
EN