Repeat Play; Programmed Play (Cd) - Sharp XL-BB20D Mode D'emploi

Listening to a CD or MP3 disc (continued)

■ Repeat play

Repeat play can play one track, all tracks or a programmed se-
quence continuously.
To repeat one track:
Select desired track using the
Press the PLAY MODE button repeatedly until "Repeat One" ap-
pears. Press the / (CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until "Repeat All" ap-
pears. Press the / (CD / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on this page
and then press the PLAY MODE button repeatedly until "Memory
Repeat" appears.
To repeat one folder:
While in Folder mode on (MP3), press PRESET ( or ) to se-
lect desired folder. Press PLAY MODE button repeatedly until
"Repeat Folder" appears. Press the / (CD / ) button.
To cancel repeat play:
Press the PLAY MODE button repeatedly until "Normal" appears
and " " disappears.
Caution:
After performing repeat play, be sure to press the
Otherwise, the disc will play continuously.

■ Programmed play (CD)

1
While in the stop mode, press the MEMORY button
on the remote control to enter the programming save
mode.
2
Press the or
sired track.
Selected track number
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
during stop mode, press the MEMORY button repeatedly.
To clear the programmed tracks, press the CLEAR button.
5
Press the / (CD / ) button to start playback.
■ Programmed play (MP3)
1
While in the stop mode, press the MEMORY button to
enter the programming save mode.
2
Press the PRESET ( or ) button on the remote con-
trol to select the desired folder.
Then press the
trol) to select the desired tracks.
3
Press the MEMORY button to save the folder and track
number.
4
Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5
Press the / (CD / ) button to start playback.
XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 12
or button.
button.
button to select the de-
or button (remote con-
EN-12
To cancel the programmed play mode:
During programmed stop mode, press the
display will show "Memory Clear" and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEM"
indicator will be displayed. During stop mode, press the
MEMORY button once. Within 10 seconds, press and hold
the MEMORY button again. Then follow steps 2 - 3 to add
tracks.
Notes:
● When the disc compartment is opened, the pro-
gramme is automatically cancelled.
● If you press the (ON/STANDBY) button to enter the
standby mode or change the function from CD to an-
other, the programmed selections will be cleared.
■ Procedure to playback MP3 disc with
folder mode on
To play back CD-R/RW.
1
In CD function, load an MP3 disc. Press the FOLDER
button and disc info will be displayed.
MP3 indicator
Total number of folder Total number of files
2
Press the PRESET ( or
playback folder. (Folder mode on)
FOLDER
indicator
FOLDER number
3
Select desired file to be played back by pressing the
or button.
4
Press the / (CD / ) button. Playback will start and
file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET ( or
be selected even though it is in playback/pause
mode. It will continue playback/pause mode in the
1st track of the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
File name display
Counter display
Album display
Note:
If "Not Supported" is displayed, it means "Not supported
playback file" is selected.
button. The
TOTAL indicator
) button to select desired
First track number in
the folder
) button, and the folder can
Folder display
Title display
Artist display
2018-01-25 10:09:54
EN