Listening To Bluetooth Enabled Devices; Bluetooth Status - Sharp XL-BB20D Mode D'emploi

Listening to Bluetooth enabled devices

■ Bluetooth
Bluetooth wireless technology is a short-range radio technology
that enables wireless communication between various types of
digital devices, such as mobile phone or computer. It operates
within a range of about 10 meters without the hassle of having
to use cables to connect these devices.
This unit supports the following:
Communication System: Bluetooth Specification version 2.1
Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
●
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the mobile
●
phone for details on operation of your mobile phone while
transmitting the sound using a Bluetooth connection.
Bluetooth devices need to be initially paired first before
they can exchange data. This unit can memorise up to a
maximum of 20 devices. Once paired, it is not necessary to
pair them again unless:
pairing is made with more than 20 devices. Pairing can
●
only be made one device at a time. If subsequent de-
vice is paired, the oldest device paired will be deleted
and replaced with the new one.
this unit is reset. All pairing information is deleted when
●
unit is reset.
Indicators:
Indicator Condition
Lights up
No indication
However, the indication status is not displayed during
Bluetooth standby mode.
XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 9

Bluetooth status

Connected
Unconnected
EN-9
■ Pairing with Bluetooth source devices
1
Press the (ON/STANDBY) button to turn the power on.
2
Press the button on the main unit or BLUETOOTH
button on the remote control to select Bluetooth function.
"BLUETOOTH" appears on the display.
3
Perform pairing procedure on the source device to detect
this unit. "XL-BB20D SHARP" will appear in the detected
devices list (if available) in the source device. (Refer the
source device operating manual for details).
Notes:
Place the devices to be paired within 1 meter of each
●
other when pairing.
Some source devices are unable to display lists of de-
●
tected devices. To pair this unit with the source device,
refer to the source device operating manual for details.
4
Select "XL-BB20D SHARP" from the source list. If Pass-
code* is required, enter "0000".
Passcode may be called PIN Code, Passkey, PIN num-
*
ber or Password.
5
"Connected" appears on the display once the unit is suc-
cessfully paired with the source device. (Pairing information
is now memorised in the unit.) Some audio source devices
may connect with the unit automatically after pairing is com-
pleted, otherwise follow the instructions in the source device
operating manual to start connection.
6
Press the play button on main unit, remote control or source
device to start Bluetooth streaming playback.
Notes:
If a device such as microwave oven, wireless LAN card, Blue-
●
tooth device or any other device that uses the same 2.4 GHz
frequency is placed near the system some sound interruption
may be heard.
The transmission distance of the wireless signal between the de-
●
vice and the main unit is about 10 m, but may vary depending on
your operating environment.
If a steel concrete or metallic wall is between the device and the
●
main unit, the system may not operate at all, because the wire-
less signal cannot penetrate metal.
If this unit or the source device is turned off before Bluetooth con-
●
nection is completed, pairing will not be completed and the pair-
ing information will not be memorised. Repeat step 1 onwards to
start pairing again.
To pair with other devices, repeat steps 1 - 5 for each device. This
●
unit can memorise up to a maximum of 20 devices. If subsequent
device is paired, the oldest device paired will be deleted.
Once a device is ousted or deleted from the pairing list, the pair-
●
ing information for the device is also deleted. To listen to the
sound from the device again, it needs to be re-paired. Perform
steps 1 - 5 to pair the device again.
XL-BB20D does not support Bluetooth profile AVRCP 1.4, hence
●
there will be no volume synchronisation even if your Bluetooth
device supports such profile.
2018-01-25 10:09:52