Basic Settings Of The Menu - Fhiaba 1T Mode D'emploi

5
Settings and Special Functions
5.3

Basic settings of the Menu

How to set the Fridge function
How to set the Crisper-Fresco function
How to revert to the Freezer function
How to reset default settings
ATTENTION: If the default settings are restored, the
default mode of the TriMode compartment is freezer
mode. If it was previously being used in refrigerator
or Fresco mode be sure to set it back to your desired
setting.
How to activate the date
How to deactivate the date
18
Select the Menu button
to select
TriMode Options The freezer compartment can, if required, be converted to refrigeration
or Crisper-Fresco operating mode.
Default Setting This offers the possibility to reset default factory settings and cancels
any previous changes.
Date
Set Date The display will show the date in the format dd:mm:yy (day:month:year),
the day will blink. Use the Up/Down buttons
the date will be set.
How to set the date
Show Date Using this function it is possible to deactivate/activate the date being
shown on the display.
Time
Set Time The display shows the hours and minutes in the format hh:mm and with
hh: blinking. Use the Up/Down buttons
How to set the time
and used the Up/Down button
.
to modify the setting, con-
to modify the setting and then
to go on to the next setting.