Malfunction Indications Appearing On The Display - Fhiaba 1T Mode D'emploi

The Ice Maker does not work
The Ice Maker does not produce
The ice cubes freeze into one block
If the unit you purchased was used as a showroom
model it may be in a special energy-saving mode
called Demo Mode where the appliance appears
to be operating (lights work and false tempera-
tures are displayed) but no cooling actually takes
place. If you suspect your appliance is in Demo
Mode please contact your point of purchase for
assistance with disabling this feature.
Make sure that the Ice Maker is on (Icemaker button
To switch on the Ice Maker press the button.
Make sure that the appliance is connected to the water supply.
On average, the Ice Maker produces approximately 10 cubes of ice
every two and half hours.
If the ice is not used frequently, it is possible that blocks of ice may form.
It is recommended to remove the block of ice cubes and then let the Ice
If the refrigerator was switched off for more than one month or if the car-
tridge was not changed for more than six months, it could be necessary to
Contact a plumber or a water treatment expert to make sure that the
problem is not due to the water supply.

Malfunction indications appearing on the display

Display message Malfunction description
Power Failure!!
Prolonged interruption of electrical power
the appliance resumes operation automatically, the display shows the warmest tem-
peratures achieved
Door Fridge OPEN Fridge door open
the message appears after a few minutes from the door opening
TriMode OPEN TriMode drawer open
the message appears after a few minutes from the drawer opening
Fridge too warm Fridge too warm
see Troubleshooting Guide
Fridge too cold Fridge too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Fresco too warm
Crisper-Fresco Compartment too warm
see Troubleshooting Guide
Fresco too cold Crisper-Fresco Compartment too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
TriMode too warm Freezer too warm
see Troubleshooting Guide
TriMode too cold
Freezer too cold
wait for 12 hours: if malfunction persists call Customer Care for advice
Error Code... Functional problems
call Customer Care who may help you to salve the problem or put you in contact with
the nearest Service Agent
Troubleshooting Guide
12
on).
12.2
31