8
Installation
OVERLOAD
WARNING
LIVE MODE OK
MAINS
Connection for LED's or solid-state-relays, for external signalling of the
OVERLOAD situation (20 V / 10 mA).
Connection for LED's or solid-state-relays, for external signalling of the
WARNING situation (20 V / 10 mA).
Output for driving the switched power for the "live"-amplifiers (normally this
output is "on" (+20 V / 10 mA DC), in the case of sanction, current is
switched off.
Mains connection cable. The SPL limiters operate at 220 .. 240 V AC. The
limiter has a built-in self recovering fuse which does not need to be
replaced.
SPL2(TS) and SPL3(TS) user manual
EN