Cleaning And Care - Klarstein COLDPLAYER Mode D'emploi

CLEANING AND CARE

Turn the power off and unplug the power cord. Always disconnect the power plug
before cleaning to avoid electric shock or mechanical damage. Use a commercially
available cleaning agent and a soft brush for cleaning. Do not use chemical cleaners.
Surface Cleaning
• Wipe the surface with a damp cloth. Do not use water, as it may penetrate into the
unit and damage the electronics.
• Do not use corrosive cleaning agents or solvents.
Storage
• If the product will not be used for an extended period of time, unplug the power
cord and wrap the product to prevent dust from entering the housing.
• After packing, store in a dry, ventilated place.
Cleaning the Internal Parts
• First remove the complete nebuliser unit. Bend the nebuliser grid slightly outwards
on both sides of the frame and remove the nebuliser grid and filter screen.
• Clean the nebuliser grille with clean water and let it dry.
• Clean the filter screen with a soft brush or cloth, wash it with clean water and then
let it dry.
Clasp Nebuliser unit.
Nebuliser grid
Filter screen
Frame
EN
23