Correcting Distorted Stretch Patterns - ELNA elnaStar Livret D'instructions

q
(B)
(A)

Correcting Distorted Stretch Patterns

The sewing results of the stretch patterns may vary
depending upon the sewing conditions, such as
sewing speed, type of the fabric, number of layers
etc.
w
Always test sew on a scrap piece of the fabric that
you wish to use.
If stretch stitch patterns are distorted, correct it with
the feed balancing dial.
e
q Feed balancing dial
w Neutral position
e Setting mark
Example: Pattern #10
(A) If the pattern is compressed, turn the feed
balancing dial in the direction of "+".
(B) If the pattern is drawn out, turn the feed
balancing dial in the direction of "—".
64