Understanding Your Unit; Operating Instructions - ChoiceMMed MDTS100 Manuel D'instructions

11 Understanding Your Unit

12 Operating Instructions

The following steps are used to guide the device operation. The details about each step are
listed in the following chart.
Step 1 Insert 2 AAA batteries into the device
Step 2 Connect the electrode pads to the wires and then connect the wires to the device
Step 3 Put the electrode pads on the stimulation-needed body area
Clean your skin before each use. Make sure your skin is clean, dry and free from lotion before
placing the electrode pads on your skin. Refer to the Pads User Guide.
Step 4 Press the ON/OFF button once to turn the power on
Step 5 Choose the output channel(s) to be used. You can use one channel at a time or both
simultaneously
Step 6 Select one of the seven mode
Step 7 Select the stimulation times
Step 8 Adjust the stimulation intensity
Step 9 Press the ON/OFF button once to turn the power off
DESCRIPTION OF OPERATION
Step 1- Insert the 2 AAA batteries into the
device.
Make sure the unit is OFF. Slide the compartment
cover on the back of device downward until the
cover pops off. Insert 2 AAA batteries according to
the diagram inside the battery compartment. Close
the cover.
DIAGRAM
10