Dmx Linking - Chauvet DJ 4BAR Flex Q Manuel De Référence

EN
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Mode
DMX Mode
Static Colors
Automatic
Programs
Auto Speed
Dimmer
Sound-Active Mode
Sound Sensitivity
Custom Color
Mixing
Infrared/DMX Mode

DMX Linking

The 4BAR Flex Q can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 494.
Master/Slave Connection
The 4BAR Flex Q uses the DMX data connection for its Master/Slave mode. Information about configuring the
4BAR Flex Q for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The 4BAR Flex Q can be operated with the CHAUVET DJ IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the 4BAR Flex Q User Manual from www.chauvetdj.com.
D-FI USB Connectivity
The 4BAR Flex Q is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the 4BAR Flex Q User Manual or D-Fi USB Instruction Sheet.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
3
QUICK REFERENCE GUIDE
Programming Levels
4Ch d.1–509
6Ch d.1–507
19Ch d.1–494
C 1–15
C--
P--
S-- S 1–100
d-- L. 1–255
Snd Snd1–8
Sens u 0–100
r0–255
g0–255
u--
b0–255
A0–255
ir
SEt
out
Description
4-channel DMX mode
6-channel DMX mode
19-channel DMX mode
Static colors
C16 3000K color temperature
C17 4500K color temperature
C18 5600K color temperature
P 1–8 Automatic programs
Program speed for P1–8
Dimmer mode
Sound-active programs
Sound sensitivity
Custom static colors
Combine red, green, blue, and amber
on
Turns infrared on or off
oFF
SLAV Enable Master/Slave with other BT products
dMX Enable Master/Slave with non-BT products
4BAR Flex Q QRG Rev. 2