Dmx Linking - Chauvet DJ SlimPAR PRO Q USB Manuel De Référence

EN
Menu Map
Mode
DMX Mode
Static Colors
Automatic Programs
Program Speed
Sound-Active Programs
Sound Sensitivity
Custom Color Mixing
Dimmer Speed Mode
Infrared Mode

DMX Linking

The SlimPAR PRO Q USB can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 503.
Master/Slave Connection
The SlimPAR PRO Q USB uses the DMX data connection for its Master/Slave mode. Information about configuring the
SlimPAR PRO Q USB for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The SlimPAR PRO Q USB can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the SlimPAR PRO Q USB User Manual from www.chauvetdj.com.
D-Fi USB Connectivity
The SlimPAR PRO Q USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the
product's DMX Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi
USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
3
QUICK REFERENCE GUIDE
Programming Levels
4-CH
5-CH d001–512
10CH
C-- C 1–19
P1
P2
P--
P3
P4
S-- S--1–100
Snd1
Snd
Snd2
SEnS u--0–100
r000–255
g000–255
U--
b000–255
A000–255
OFF
dIM1
dIM
dIM2
dIM3
On
SEr
OFF
Description
4-channel DMX mode
5-channel DMX mode
10-channel DMX mode
Static colors
4-color program (snap)
4-color program (pulse)
19-color program (snap)
19-color program (fading)
Program speed for P 1–4
4-color sound-active program
19-color sound-active program
Sound sensitivity
Custom static colors
Combine red, green, blue, and amber
Linear dimmer
Dimmer speed settings: dIM1 (slow) to dIM1 (fast)
Enables or disables infrared control
SlimPAR PRO Q USB QRG Rev. 4