2. Maintenance and Care
Tighten all hardware after first use and periodically thereafter.
CLEANING:
▪ Rinse with lukewarm water; wash gently with mild soap or detergent and lukewarm water, using a soft cloth or sponge. DO NOT SCRUB
or use brushes or squeegees.
▪ Rinse again. Dry with soft cloth or moist cellulose sponge to prevent water spotting.
▪ To remove wet paint, glazing compound or grease, rub lightly with a good grade of VM&P naphtha or isopropyl alcohol, then wash and
rinse. DO NOT USE GASOLINE.
NOTICE: Abusive cleaning procedures by hand washing or automated washing equipment will eventually result in visual hazing, loss of
light transmission and coating delamination.
Compatible Cleaning Agents
▪
Aqueous Solution of Soaps and Detergents
Joy
Freon T.F.
Palmolive liquid
Top Job
VM&P grade Naphtha
Windex
(with ammonia D)
MINIMIZING HAIRLINE SCRATCHES
For minimizing scratches and minor abrasions, mild automobile polish can be used.
Recommended products: Johnson Paste Wax, Novus Plastic Polish #1 and #2, Mirror Glaze plastic polish and Plexux1.
Testing polish on a separate Lexan sample is recommended. Be sure to follow product instructions carefully.
2783 - Instructions YAMAHA YXZ Rear Windshield GP- rev00
www.kolpin.com
3