Maintenance And Cleaning - ratiotec coinsorter CS 500 Mode D'emploi

Maintenance and cleaning

For a trouble-free operation, we recommend an annual maintenance of the product via the ratiotec service and
regular cleaning of the machine. Please always turn off your device and disconnect it from the wall socket be-
fore cleaning! Switch off the machine and slide the Safety-Lock switch on the back to the opened lock symbol.
Pull the two side openers at the upper part of the machine upwards according to the markings and remove the
top cover.
When cleaning the sensors we recommend to remove the coin cups from the device and to always clean the
paired sensors together (at both long sides of the sorting holes). For cleaning you can additionally use a com-
pressed air spray.
Clean the transport
brush with cleaning brush
After cleaning, place the transport wheel back in to the initial position, by pushing the mechanism down and
rotating the wheel back to position 1 or 2.Put the top cover back onto the machine. Slide the Safety-Lock switch
on the back to the closed lock symbol and insert the coin cups back into the device.
Central position
Transport rail
IR sensors on
the two sides
of pipes
[ EN]
7