ratiotec coinsorter CS 500 Mode D'emploi page 5

Batch
The CS 500 makes it possible to count a preset number of coins from a bigger amount of coins, for instance to
prepare coin rolls. To specify the batch value/counting stop for the individual coin cups, open the overview by
pressing the SET key.
The following is displayed: the upper value indicates the value of the selected coin, the lower value is the set
count stop at which the machine should stop counting. The value zero means that no counting stop is desired.
Press the "PRINT" key to switch between the counting stops of the individual coin types. Use the "+" and "-"
buttons to adjust the values. If you press and hold the "+" or "-" buttons, the value will be increased/decreased
in steps of 10. Press the "CLEAR" key to delete a set count stop. Press and hold the "CLEAR" button for approx
2 seconds to clear all set count stops. To get out the setup menu, press the "START/STOP" key. The previously
set batches are saved.
If the counting stop of a coin type is reached, the machine stops the counting process and you receive the
following display:
€
BAT ON
Counting stop at 2 Cent of 20 coins reached
Press the "START/STOP" button to resume counting.
Use the "+" key to activate and deactivate the set batch counting (in the normal counting mode). If a batch is
active, the display shows "Bat On"
Maximum amount of coins per coin cups, coin bags and tubes
The second setting option in the setup is the setting of the container type. In the standard display, press the
"SET" button twice to open the menu point. Press "PRINT" key to select container type. Depending on the
container type the CS 500 stops at the respective maximum charging capacity.
€
GAP
BO = Standard coin box
Counting stop 400 coins at 0.01 €
€
GAP
BA = Money bag
Counting stop 6.500 coins at 0.01 €
€
GAP
TU = Coin tube
Counting stop 50 coins at 0.01 €
[ EN]
5