Neato Botvac D6 Connected Démarrage Rapide page 4

Troubleshoot Pairing Issues
If you are not able to connect your robot, you may need to restart the
pairing mode. Follow these steps:
• Press and hold the
Start Button and Right
Side Bumper for 10
seconds to turn robot off.
• Press the Start Button again to turn robot on. The Info indicator
will be slow blinking blue showing the robot is in pairing mode.
• Follow steps in the Neato app to CONNECT YOUR ROBOT.
During pairing the Info indicator will change based on the
connection status:
INDICATOR COLOR WHAT IT MEANS
Very Slow Blinking Blue Robot is in Pairing Mode
Fast Blinking Blue Pairing to Neato app/account
Solid Blue Pairing successful
Solid Red Pairing unsuccessful
NOTE:
If you've already paired, Fast Blinking Blue means the robot has lost connection. The robot
could be out of range, your Wi-Fi network may be down, or another Wi-Fi issue may have occurred. If
out of range, the robot will automatically reconnect when it comes back within range. Otherwise, check
your router to make sure it's operating normally.
Right
Start
Side
Button
Bumper
(shows for 5 seconds)
(shows for 5 seconds)
Start Using Your Robot
Use the Neato app to start
using your robot, or press the
Start Button on the robot.
TIP: Before the robot starts to vacuum, pick up items that could
become tangled, such as cables, socks, and shoelaces. Tuck fringes
under rugs
ACTION
Start Cleaning Press start button one time for a full house
cleaning
Press start button two times for a spot cleaning
Pause/Resume Press Start Button during cleaning to pause
Cleaning robot.
Press Start Button again to resume cleaning.
Cancel Cleaning Press & hold Start Button for 5 seconds
NOTE:
Spot cleaning lets you clean
a small 7 feet by 7 feet area.
Place your robot
centered and
facing the area
to be cleaned.
Info indicator
Battery indicator
Start Button
INFO INDICATOR
Solid Blue
Solid White
It will blink
It will blink
Robot and lights
turn off and robot
plays a tone.
NOTE:
If the lights are blinking red or are solid red,
your robot may need maintenance. Please refer to the
online user guide or call the customer service number.