Initial Operation; Packing Contents; Connecting The Mains Cable; Mount The Bracket - AgfaPhoto AF 5086MS Guide D'utilisation

3 Initial Operation

Packing Contents

1 Photo Frame
1 Digital photo frame with bracket
EN
2 Interchangeable Frames
2 Interchangeable frames
3 A Remote Control (with battery)
3 A remote control (with battery)
4 Power supply
4 Power supply
5 USB Cable
5 USB cable
User Guide (not depicted)
User Guide (not depicted)
Verpackungsinhalt AF 5135
Packing Contents
If one of the parts is missing or damaged, please con-
tact your retailer or our customer service.

Mount the Bracket

Mount the Bracket
Assemble the Photo Frame bracket on the back to prop the
player up.
Ständer anbringen
6

Connecting the Mains Cable

Mains Voltage at Setup Location
1 Insert the mains cable into the connection located on
Connecting to a PC
Using the USB cable, you can connect your photo frame
to a computer to transfer files between the internal memo-
ry and computer.
1 Switch the device off using the on/off switch on the
2 With the photo frame turned off, connect the small end
3 Switch the device on using the on/off switch on the
AgfaPhoto Digital Photo Frame AF 5086MS · AF 5105MS · AF 5135MS
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
the rear side of the device. Connect the mains cable to
the electrical socket. Do not switch on the device!
If you connected the photo frame to a computer, the
inserted memory card can not be recognized.
rear.
of the cable to the frame and the large end to your com-
puter.
rear. Allow the computer a few moments to recognize
the new hardware. Compatible photo, music and video
files can be copied using Explorer onto the internal
memory