AgfaPhoto AF 5086MS Guide D'utilisation page 41

6 Service
Changing the frame
You can change the frame of the device using the picture
frames supplied. The frames are held with magnets.
1 Press on the change frames button on the back of the
device. Remove the frame.
Information
Problems
Photo Frame does not power on.
Cannot save files
No sound
Memory card can not be recognized
Service
2 Place the picture frame onto the device until it engages
on the magnets.
Solutions
Check that you connect the AC adapter to the photo frame
properly.
Make sure that enough internal memory is available. Re-
start the picture frame and delete some files in order to free
up memory space.
Make sure the file format is supported, the computer and
the frame are correct connected or the memory card is not
damaged.
If you connected the photo frame to a computer, the insert-
ed memory card can not be recognized.
EN
11