Initial Operation - AgfaPhoto AF 5077PS Manuel De L'utilisateur

Initial Operation

Packing Contents
Digital photo frame
‚ Digital photo frame with bracket
Power supply with exchangeable plugs
ƒ Power supply with exchangeable plugs
Remote control (with battery) Variable
„ A remote control (with battery)
(AF¦5077/¦5087/5107MS)
User Guide (not depicted)
User Guide (not depicted)
Verpackungsinhalt AF 5077
Missing Package Contents
Notice
Missing Package Contents
If one of the parts is missing or dam-
aged, please contact your retailer or our
customer service.
Connecting power supply
Mains Voltage at the Site of Installation
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of
your device (indicated on the type label)
matches the mains voltage available at
the setup location.
1 Choose the right plug for your country and
slide it onto the power adapter. Ensure that the
plug snaps in completely.
2 Insert the small plug of the power supply into
the socket on the rear side of your device. In-
sert the power supply unit into the socket.
Connecting to the PC
Using the USB cable, you can connect your photo
frame to a computer to transfer files between the
internal memory and computer.
1 Switch the device off using the on/off switch
on the rear.
2 With the frame turned off, connect the small
end of the cable to the digital picture frame
and the large end to your computer.
3 Switch the device on using the on/off switch
on the rear. Allow the computer a few mo-
ments to recognize the new hardware. Com-
patible photo, music and video files can be cop-
ied onto the internal memory.
4 If the connection with the computer is discon-
nected, the digital photoframe will restart au-
tomatically.
Inserting a Memory Card
1 Insert a memory card into the appropriate card
slot at the rear of the device. Your photo frame
supports the following memory cards: SD/
MMC/MS/SDHC/XD.
DANGER!
Inserting a Memory Card!
Only use storage media that are com-
patible with the device.
Never pull out the memory card while
the device is accessing it. This could
cause data to be damaged or lost.
2 Switch the device on using the on/off switch
on the rear. The player will start slide show af-
ter the start screen be displayed.
Notice
Many Photos on the Memory Card
If the memory card contains many
photos, it can take some time until
the slide show starts.
3 Press OK at the rear during a slide show to
stop the slide show.
Notice
Using USB device and memory card at
the same time
If a USB storage device is used at the
same time as a storage card, the im-
ages from the memory card are dis-
played first.
EN
4