Pump Description; Parts Description; Buttons Description - Avady Cristal LED Manuel D'instructions Et D'utilisation

Instructions and user manual Device pH

2.0 PUMP DESCRIPTION

DEVICE PH is characterized by its ability to measure pH value (between 0and 14) with its probe placed on
the filtration system that analyses the pool water.
Depending of the measured value, DEVICE PH will inject with its dosing pump the amount of product
needed to maintain the balance of the pool water.
DEVICE PH works in acid (pH-).

2.1 Parts description

Here are the complete contents of the package you received. All parts will be necessary for the proper
operation of your device.

2.2 Buttons description :

1- Press SET to see and adjust the set point
2- Press CAL allows the calibration of the pH to pH 7, associated to the SET button to change the
value of the set point.
3- 7.0 value of the pH in water
4- ON/OFF button to turn on the device, and, kept pressed, to prime the pump
1
4
3
1
A.
B.
C.
D.
E.
F.
G. Inline electrode holder
H. Injection valve
I.
J.
Fig. 2
4
NOT065ENV02
Shutter
4 m of tube 4x6 PVC crystal
Electrode pH
Clamp DN50
Foot filter
Buffer solution pH7
Screws and peg for wall mounting x2
Bracket
Fig. 1
2