Warn 83405 Instructions De Montage page 9

INSTALLATION CONT.
15. Feed winch cable through fairlead (provided
in winch kit) and mount to fairlead brackets,
using M10x1.25x25mm capscrews, lock
washers and flange nuts. Torque to proper
specifications. Install hook and strap to
loop on end of winch cable (also provided in
winch kit).
16. Figure 16 shows a completed installation.
WARNING
READ THE VEHICLE'S OPERATOR MANUAL,
WINCH OPERATOR MANUAL, AND ALL WARN-
ING LABELS PRIOR TO OPERATION OF UTV
AND WINCH.
THE WINCH MOUNTING PLATE INSTALLATION IS NOW COMPLETE.
• Wire winch according to instructions found in winch kit.
PROCEED TO SECTION TITLED "MAINTENANCE/CARE".
PAGE 9
Figure 16
83406A0