Leveling The Unit; Settings - INVENTOR MB490W Manuel D'utilisateur

Leveling the Unit

Adjust the two levelling feet at
the front of the unit. If the unit
is not aligned, the door and
magnetic seal alignments will
not be covered properly.

8. SETTINGS

Thermorstat Temperature Setting
The thermostat is located in the interior at the
upper part of the refrigerator. The adjustment
levels of the thermostat range from 1 to 6:
• Setting "OFF": the cooling operation stops
• Thermostat adjustment between 1-2:
Minimum cooling
It is suggested when the storage quantity is
very small.
• Thermostat adjustment between 3-4:
Normal cooling
When installing the appliance for the first
time, be sure to set the thermostat to the
Normal cooling and wait 24hours before placing
items inside.
• Thermostat adjustment between 5-6: Maximum cooling
If there is a large amount of frozen goods, or if the outside temperature is high, the
thermostat knob may be set to its highest position, for a short time.
For determining the correct temperature control setting,
consider the following:
✓
Room temperature
✓
How frequent the Mini Bar door opens
✓
The quantity of stored goods
✓
Position of the appliance
12
x x
EN