Leveling The Unit; Settings - INVENTOR INVMS93A2 Manuel D'utilisateur

Leveling the Unit

Adjust the levelling foot at the
front of the unit. If the unit
is not aligned, the door and
magnetic seal alignments will
not be covered properly.

8. SETTINGS

Thermorstat Temperature Setting
The thermostat is located in the interior at the
upper part of the refrigerator. The thermostat
setting levels are the following:
• Setting "OFF": the cooling operation stops
• Setting "MIN": Minimum cooling
It is suggested when the storage quantity is very
small.
• Setting "MED": Normal cooling
When installing the appliance for the first time,
be sure to set the thermostat to the MED setting
and wait 24hours before placing items inside.
• Setting "MAX": Maximum cooling
If there is a large amount of frozen goods, or if
the outside temperature is high, the thermostat
knob may be set to its highest position, for a short
time.
For determining the correct temperature control setting,
consider the following:
Room temperature
✓
How frequent the Mini Bar door opens
✓
The quantity of stored goods
✓
Position of the appliance
✓
12
x x
EN