Tips For Keeping Food In The Unit; Cleaning; Cleaning The Interior And The Exterior Of The Unit; Cleaning Tips - INVENTOR INVMS93A2 Manuel D'utilisateur

4.3 Tips for Keeping Food in the Unit

Cooked meats/fishes should always be stored on a shelf above raw meats/fishes to avoid
bacterial transfer. Keep raw meats/fishes in a container which is large enough to collect juices
and cover it properly. Place the container on the lowest shelf.
Leave space around your food, to allow air to circulate inside the unit. Ensure all parts of the
unit are kept cool.
To prevent transfer of favours and drying out, pack or cover the food separately. Fruit and
vegetables do not need to be wrapped.
Always let pre-cooked food cool down before you put in the unit. This will help to maintain
the internal temperature of the unit.
To prevent cold air escaping from the unit, try to limit the number of mes you open the
door. We recommend that you only open the door when you need to put food in or take food
out.

5. CLEANING

Defros ng
5.1
It is recommended to defrost the chill box when 3-4mm frost has been
accumulated. Never use sharp or metallic objects to remove frost
- Unplug the appliance
- Empty the appliance
- Remove excess eater and make sure that the interior is
completely dry
- Refill the appliance and plug it back in

5.2 Cleaning the Interior and the Exterior of the Unit

Remove all the shelves and the salad bin. To remove the salad bin first remove the lower
door shelf.
Wipe the inside of the unit with a weak solu on of bicarbonate soda and then rinse with
warm water using a " wrung-out" sponge or cloth. Wipe completely dry before replacing the
shelves and salad bin.
Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make
sure that the door is closed to avoid the polish ge ng on the magne c door seal or inside
the unit.
The grille of the condenser at the back of the unit and the adjacent components can be
vacuumed using a so brush a achment.

5.3 Cleaning Tips

Condensa on may appear on the outside of the unit. This may be due to a change in room
temperature. Wipe of any moisture residue. If the problem con nues, please contact a qualified
technician for assistance.
6