What If There Are Problems; Technical Data; Disposal; Warranty And Service - Beurer MC4000 Mode D'emploi

8.

What if there are problems?

Problem
Grinding noises during
operation
The massage cannot be
started.
Back rest or leg rest
cannot be raised or
lowered.
9.

Technical Data

Product description
Mains voltage/frequency
Energy consumption
Dimensions (in flat position)
Weight
Maximum load capacity
10.

Disposal

Observe the local regulations for material disposal.
Dispose of the unit in accordance with EC Directive
2002/96/EC – WEEE (Waste Electrical and Electronic
Equipment).
11.

Warranty and service

In the event of a warranty claim or service case,
please contact Customer Services in your respective
country.
You can find the address in the enclosed address list.
Cause
These noises are normal and originate from
the operating motor or from the massage
rollers rubbing against the cushion.
The mains plug is not connected to the
socket.
The massage chair is not switched on at
the main switch.
The cutout switch for the massage chair
has interrupted the power supply.
Back rest and/or leg rest are overloaded or
blocked.
Solution
No action is necessary.
> Plug the mains plug into the socket.
> Switch on the massage chair at the
> In this case, please contact
> Remove the objects blocking the
Massage chair MC4000
220-240 V ~ 50/60 Hz
150 W
Length 175 cm, width 80 cm, height 67 cm
72 kg
120 kg
If you have any questions, please contact
the local authorities responsible for waste
disposal.
19
main switch.
Customer Service.
device.